Bits2waves Download

Download the template, unzip the files into a dedicated directory, and double click on “PCBTemplate 10_29_2018_2D_Cutter.emp” to start.

Always use the template as the start of your design. 

NEVER start a design using File->New as it will not have the correct parameters for simulation and fabrication.

Make sure you layout your parts to connect together!! The branchline must match the Wilkinson!!  Connectors are provided during testing to assemble the radio.

Your radio will be fully tested at the SDC/Workshop. Below is an example radio. All input signals (I and Q) will be provided, as well as a receive antenna and demodulator to measure Error Vector Magnitude.